Updated November 2026
High quality laminate flooring is easier to spot once you know what to check. This guide walks through the four specs that matter most: wear layer, core density, locking system and underlayment. By the end, you will be able to read a sample board and a product label and decide whether a floor will hold up in your home.
Start With the Wear Layer
The wear layer is the clear protective top coat over the printed image. It takes the scuffs, pet claws and grit that would otherwise dull the design. Manufacturers usually list it in microns, and the higher the number, the longer the floor will keep its look. For a busy kitchen or a home with large dogs, look for a thicker wear layer. For a bedroom or a lightly used guest room, a thinner layer can be a reasonable budget pick.
Shopping for one? See our guide: 7 Best Laminate Flooring Installation Tools for DIY Renovators (2026).
Hold the sample under a lamp and tilt it. A cheap wear layer often shows a glossy, plastic-looking surface, while a better one has a more natural texture and sharper detail in the printed grain.
Check Core Density and Board Thickness
The core is the fiberboard layer beneath the photo and wear layer. Dense core resists swelling and holds the locking joints tightly. Press a corner of the sample: a solid, firm board is a good sign, while a board that feels soft or crumbles at the edge suggests low-density core. Board thickness also matters. Thicker planks feel more solid underfoot and hide subfloor imperfections better, though they cost you a little headroom at doorways.
Evaluate the Locking System and Moisture Resistance
A floating floor depends on its joints. Click-lock systems let you assemble planks without glue, and a well-machined joint closes flat with no gaps. Run your fingers along the seam of a sample and look for a tight, even fit. Manufacturers often list water-resistant or water-repellent core in their specs. That does not make laminate waterproof, so wipe up spills quickly in any room, and avoid installing it in full bathrooms without checking the manufacturer’s installation limits.
Match the Underlayment to the Floor
Underlayment controls sound, cushions the walk and acts as a moisture barrier. Many laminates ship with a pad attached, but it is often thin. Check whether the manufacturer names a required underlayment type and thickness, and follow that recommendation. A good underlayment makes a mid-grade floor feel noticeably more solid, so it is worth reading the installation guide before you order.
Quick Checklist Before You Buy
- Ask for the wear layer thickness in microns and compare it to your room’s traffic.
- Press a sample corner to judge core firmness.
- Test the click joint for a tight, flat fit.
- Confirm the moisture rating and whether the product suits your room.
- Read the manufacturer’s underlayment requirement.
- Buy about 10 percent extra to cover cuts and waste.
Common Mistakes
- Judging quality by the photo alone. The print can look rich on a cheap board.
- Choosing the thinnest wear layer for a high-traffic kitchen or entryway.
- Skipping the underlayment spec and using whatever pad is on hand.
- Assuming water-resistant means waterproof, then letting spills sit.
- Ordering exactly the square footage with no spare planks for future repairs.
Recommended Gear
- A pull bar and tapping block help you seat click joints tightly without damaging the edges. View on Amazon
- A moisture meter lets you check the subfloor before installation, which protects a laminate floor from hidden dampness. View on Amazon
For more on preparing the floor beneath your product, see Subfloor Preparation and Flooring Underlayment Explained. If you are still deciding between materials, Laminate vs Vinyl Flooring compares the two side by side. Once you have chosen a product, How to Install Laminate Flooring: A Step-by-Step Guide for Beginners walks through the job from start to finish.
FAQ
How thick should the wear layer be?
For most living areas, a moderate wear layer handles normal daily use. Choose a thicker layer for kitchens, entryways and homes with pets, since those spots see more abrasion.
Can laminate flooring go in a bathroom?
Some laminates are water-resistant, but standing water and high humidity can damage any laminate. Check the manufacturer’s rules for bathrooms and consider a more moisture-tolerant flooring if the room gets wet often.
Do I need a separate underlayment?
It depends on the product. Some laminates include an attached pad, while others require a separate underlayment. Follow the manufacturer’s specification for the best sound and moisture control.
Conclusion
High quality laminate flooring comes down to a thick enough wear layer, dense core, a tight locking system and the right underlayment. Test samples with your hands and under light before you commit. A little checking at the store saves a lot of regret after the planks are down.

