Updated November 2026
To repair drywall, you need a small set of inexpensive tools and materials: joint compound, a putty knife, sandpaper, a utility knife, and either a patch kit or mesh tape depending on the size of the damage. With those on hand, most holes up to about 6 inches across and surface cracks can be fixed in a weekend. This guide covers what to buy, when you need each item, and how to use them in order.
Start by Sizing Up the Damage
Your materials depend on how big the problem is. Measure the hole or crack before you shop.
Shopping for one? See our guide: 6 Best 3M Drywall Repair Kit Options for Home Repairs (2026).
- Dents and small holes (under 2 inches): Joint compound alone, applied with a putty knife, usually does the job.
- Holes from 2 to 6 inches: Add a self-adhesive mesh patch or a metal patch kit so the compound has something to bond to.
- Holes larger than 6 inches or damp, crumbling board: You will likely need to cut out the damaged section and install a new piece of drywall. Consider a professional for water damage or structural concerns.
What Do I Need for Drywall Repair: The Supply List
Gather these before you start:
- All-purpose joint compound (premixed is easiest for beginners)
- A 6-inch and an 8-inch putty knife, flexible steel
- Self-adhesive fiberglass mesh tape or a patch kit for holes over 2 inches
- Sandpaper or a sanding sponge, around 120 grit for the final pass
- A utility knife and a drywall saw for trimming damaged edges
- A mixing pan or bucket, plus a drill mixer if using setting-type compound
- Primer and matching paint
- A dust mask, safety glasses, and a drop cloth
If you are unsure which items apply to your project, the guide to Supplies for Drywall Repair: A Step-by-Step Guide for Beginners breaks them down by repair type, and Tools Needed for Drywall Repair: A Step-by-Step Guide for Beginners covers the hand tools in more detail.
How to Repair the Wall Step by Step
Prepare the Surface
Cut away any loose paper or crumbling gypsum with a utility knife. Clean the area so the compound can bond. For holes with a clean edge, trim them into a square or rectangle to make patching easier.
Apply the Backing or Mesh
For holes over 2 inches, press self-adhesive mesh over the opening, or insert a metal patch and screw it in place. Mesh is forgiving for beginners because it does not require a backing board behind the hole.
Apply Compound in Thin Coats
Spread a thin layer of joint compound with the 6-inch knife, then feather the edges outward. Let it dry fully, which can take 12 to 24 hours for standard compound depending on humidity. Add a second coat with the 8-inch knife, extending the feathered edge a few inches past the first.
Sand and Prime
Once dry, sand lightly until the patch is flush with the surrounding wall. Wipe away dust, apply primer, and paint. Primer matters because bare compound absorbs paint differently and can show as a flat spot.
For a more detailed walkthrough of sanding, see What Grit Sandpaper for Drywall Repair: A Step-by-Step Guide. If your repair involves a small crack or screw pop, Screw Hole Drywall Repair: A Step-by-Step Guide for Homeowners explains that process.
Common Mistakes to Avoid
- Applying one thick coat instead of several thin ones, which leads to cracking as it dries.
- Skipping mesh or a backing on holes over 2 inches, causing the patch to sag or crack.
- Sanding too early, before the compound has fully dried.
- Forgetting primer, which makes the patch show through the paint.
- Working in a cold or damp room, which slows drying and weakens the compound.
Recommended Gear
- Self-adhesive fiberglass mesh tape: Bonds to the wall and gives compound a surface to grip on medium holes. View on Amazon
- Flexible stainless steel putty knife set: The flexibility makes it easier to feather compound smoothly. View on Amazon
- Premixed all-purpose joint compound: Ready to use with no mixing, which suits first-time repairs. View on Amazon
FAQ
Do I need a drill to repair drywall?
Not for premixed compound or small patches. A drill with a mixing paddle is useful only if you buy powdered setting-type compound in larger quantities.
How long does drywall repair take?
Plan for two to three days for a small patch, mostly because of drying time between coats. Larger repairs with multiple coats may take longer.
Can I repair drywall without patching compound?
For very small dents, some people use spackle, which works for light touch-ups. For anything structural or larger than a small hole, joint compound with mesh is the more durable option.
Conclusion
For most homeowners, a putty knife, joint compound, sandpaper, and mesh tape cover nearly every common repair. Match your materials to the size of the hole, apply thin coats, and allow proper drying time. For water damage, mold, or structural problems, consult a professional before starting.

